pocket anemometer

A wind gauge that also keeps an eye on altitude, weather and humidity. Not only for outdoor enthusiasts, it is also suitable for engineers, painters and others who can use its functions. Collected data can be transferred to a PC using an infrared interface. 

Key features:

• Wind gauge, max and average wind speed

• Thermometer, Celsius or Fahrenheit

• Altimeter, precise to 1 meter

• Barometer, with 24 hours’ history

• Clock with alarm

• Stopwatch, with split times and countdown timer

• Humidity meter, dew point, heat index

Request a quote to: leonorlobo@jroma.pt

THERMO-ANEMOMETER

The HD2103.2 is a portable instrument with a large LCD display. Is designed for use in the fields of air conditioning, heating, ventilation and environmental comfort. 

Use hot-wire or vane probes to measure air speed, flow rate, and temperature inside pipelines and vents. Temperature only is measured by immersion, penetration or air contact probes. The temperature sensor used can be chosen from the Pt100, Pt1000 or Ni1000. 

The probes (must be ordered separately) are fitted with the SICRAM module, with the factory calibration set- tings already being memorized inside. 

The HD2103.2 instrument is a datalogger. It memorizes up to 38,000 samples which can be transferred from the instrument connected to a PC via the multi- standard RS232C serial port and USB 2.0. The storing interval, printing, and baud rate can be configured using the menu. Can transfer the acquired measurements in real time to a PC or to a portable printer. 

The Max, Min and Avg function calculate the maximum, minimum or average values. Other functions include: the relative measurement REL, the HOLD function, and the automatic turning off that can also be disabled. Measuring units °C - °F - m/s - km/h - ft/min - mph - knot - l/s m3/s - m3/min - m3/h - ft3/s ft3/min - WCT

The instrument have IP67 protection degree.

Request a quote to: leonorlobo@jroma.pt